Build Earthquake, Flood & Fireproof Houses for Less!

Build excellent EARTHQUAKE, FLOOD, HURRICANE, TORNADO and FIRE RESISTANT HOMES at a low cost in 3-15 days.

The frequency and intensity of wildfires, floods, hurricanes and tornadoes are increasing; earthquakes pose a serious threat in many countries, while disaster-resistant construction is difficult and expensive.

ISB-PHC 250 is a revolutionary solution for building high-quality, disaster-resistant homes quickly and economically.

Our load-bearing reinforced concrete lattice structure is FIVE TIMES lighter than traditional load-bearing structures, and yet it is stronger, which is why our homes can withstand earthquakes up to 8.0 on the Richter scale.

ISB homes have the highest fire resistance and vapor permeability: they "breathe" well.

When the roof is also made of ISB, the home can withstand fires, floods, hurricanes and tornadoes.

Our thermal transmittance or U-value is only 0.25 without insulation, so ISB homes have very favorable thermal resistance characteristics and can be sustainably maintained.

Building an ISB home is very simple, fast, and economical, you only need concrete, iron, and ISB elements.

The structure and walls of a 100 square meter or one thousand square foot house are completed in 3 to 7 days, and a two-story house in 7 to 14 days, without skilled labor and at a lower cost.

There is no need to plaster the walls, so ISB homes are ready for occupancy in 8 to 10 weeks.

For high-rise buildings, ISB walls are ideal as wind-bracing masonry structures.

We already have exclusive partners in Germany and six other countries.

Purchase a fully equipped ISB-PHC 250 factory to gain exclusivity and produce the elements for 180 homes per month in the country of your choice.

Once you have exclusivity for a particular country, you can purchase additional factories.

With frequent wildfires, hurricanes and tornadoes, a constant threat of earthquakes on the West Coast, and the largest economy in the world, the U.S. is our primary target market where we plan to operate our own ISB factories.

Invest in our ISB factories from as little as €100,000.

You can earn a substantial return on your investment and take pride in building a sustainable future.

 

This complete construction system technology is an alternative to monolithic reinforced concrete structures.

The houses can be structurally completed in 3-7 days. You only need concrete, steel, and made-to-measure ISB-PHC elements, and they are significantly cheaper than structurally ready houses built using the traditional method because the material and labor costs are also considerably lower: no skilled workers are needed, only trained workers.

In the case of a traditional 200 mm thick monolithic reinforced concrete structure, a 5 m2 wall or slab supporting structure can be built from one cubic meter of concrete; on the other hand, when building an ISB structure with the same load capacity, a 25 m2 wall or 15 m2 wall structure can be built from one cubic meter of concrete.

The weight of the load-bearing reinforced concrete lattice structure is only 20% of the traditional load-bearing structures, but it is more potent, which is why ISB houses are earthquake-resistant.

From the point of view of building physics, the traditional monolithic reinforced concrete structure is vapor-tight, not suitable for the construction of living spaces, and its thermal insulation is minimal, in contrast to the ISB structure, which is vapor-permeable and thermally insulated due to the monolithic reinforced concrete grid structure and porous concrete bark elements.

The 25 cm wall structure of the ISB is also lighter and narrower than in the case of traditional construction, which is why it is more economical and has a better ratio of the net and gross built-up areas; therefore, apartments with a larger net living area can be built on the same gross built-up area.

We also get to complete "turnkey" completion faster and more economically than usual because neither interior nor exterior plastering is required so that a house can be completed in 60 days from the foundation.

The operation of buildings made with the ISB construction system is also economical, energy-saving, and sustainable.

References: Germany (3.000 houses), Kuwait, Algeria, Ghana, Togo, and more than 100,000 m2 built in Hungary only, including a three-story clinic in Balatonmáriafürdő, office buildings, luxury family houses, etc., some reference plans can be viewed here:

3D catalog of ISB houses.

The technology and a manufacturing plant have just been sold for 10 million Euros to a developing country.

For more information, please contact us via [email protected] or +36 70 413-6888 or by clicking here.

 

Build excellent earthquake and fireproof houses much cheaper and quicker!  

You only need steel, concrete, and ISB!

An ISB house's earthquake-resistant and fireproof structure can be built in 15 days and finished in only two months, as no plaster is needed.

Excellent thermal and sound insulation but ventilate air naturally

ISB-PHC is a fire-resistant, lightweight foamed concrete construction material weighing only 120 to 350 kg/m3, with the same parameters as the internationally known Ytong building blocks but with better vapor permeability, thermal, and sound insulation properties

Buy the know-how and a factory to manufacture the walls and roof for a two-story house EVERY DAY, 365 houses a year! 

Manufacturing a house's earthquake and fireproof walls and roof will only cost you around US$ 260/m2, US$ 26/square foot.

The ISB Building System® is the result of many years of research and development, which implements simple, fast, economical, and modern construction following the new market needs and trends.

ISB is introducing a PHC (Perlite) based solution to significantly lower construction costs and duration while non-compromising durability and quality: using ISB-PHC`s lightweight foamed concrete, a building material weighing 120 to 350 kg/m3 can be manufactured.

It has the same parameters as the internationally renowned Ytong building elements but has better thermal and sound insulation, flame retardant, and vapor permeability properties.

It is mainly a building material suitable for exterior and interior thermal insulation of wall structures, but it is also convenient for making the exterior and interior crust of the
75 x 50 x 25 cm wall and ceiling elements of the ISB Building System® and 75 x 50 x 8 cm thick partition wall elements, thus forming a complex construction system unique worldwide.

This complete construction system technology is an alternative to monolithic reinforced concrete structures.

We are looking for partners to implement the new technology and/or build a factory for the ISB PHC technology in their region.

Investors are also welcome.

For more information, please contact us via [email protected] or +36 70 413-6888 or by clicking here.